FrankenTextiles
FrankenTextiles

The exhibition

Workbenches · run on your device

The project

The skirt atelier

Cut on
the curve.

Six curved panels follow the rise from waist to hip. Choose a size, then change the sweep below it.

Silhouette
Form waist / cm

92.0 cm fitted hip · +1.4 cm flat waist ease

Sew this cut
Flared skirt on the 68 cm form
Loading the 3D view
Flat hem168 cm
Hem height spread26.5 mm
Inspect the cloth
Print this cut 68 cm waist · A4 PDF

Construction study

From cut to cloth.

Flared skirt

Six gores · 68 cm form

Each gore widens from the waist to the hem. Joined edge to edge, the six pieces give the hem 168 cm of sweep.

Flared skirt · Flat pattern

At the waist

A horizontal slice through the worn skirt and torso, 99.2 cm above the sole. The median height of the bound edge is 8.5 mm below the form’s natural waist.

BodyCloth

Centre-front gap 6 mm · Centre-back gap 7.6 mm

Front
Measurements & solver notes

The six panels have a combined 69.4 cm waist and a 59 cm centre length. The flared hem measures 168 cm on the sewing line. The native Anny waist is 68.0 cm against a 68 cm target.

Each size has its own flat cut, fitted Anny body and native run with 20 sewing steps and 64 gravity steps. Body contact and cloth self-contact are active. All cuts use the solver’s synthetic sheet. The check, linen and print controls change its appearance. The optional tailor’s bust comes from the same body surface.

The hem height spread is the difference between the highest and lowest of the six native panel hem readings at the endpoint. The 95th percentile of edge strain is 0.46%. The strain view uses the endpoint colors. Red indicates extension, blue compression and white little change.

The cut selector shows settled drapes that passed the native checks. Refusals and provisional endpoints are recorded with their solver messages in the run data.

The PDF includes all six pieces with 10 mm seam allowances and print calibration squares. Print at 100% and check the scale before cutting. A sewn sample is needed to establish fit.

Pattern source ↓ · Runs, residuals & refused cases ↓ · Link to this cut and form ↗
Settled endpoint

Studio film

Two hems
in motion.

Follow the same 68 cm form from the column cut to the flare. The stitched panels change shape as each skirt takes its own weight.

Print the 68 cm column cut ↓