The drape room

Cloth in
motion.

Five flat pieces become a wool bolero. Change the figure’s chest or raise its arms to see where the sewn cloth pulls closer.

Chest target cm
Arm angle from the side
Full-size sewing patternsBolero Trousers
Explore the trouser cross-sections
Zouave bolero
Reverse
Fitted chest52.0 cm
Mean chest gap20.6 mm
Edge strain P950.19 %
Loading 3D…
How the cloth was simulated Settled

Each combination replays a separate FrankenTextiles run with the same pattern and fabric. The first 88 frames illustrate assembly. The final 48 show native sewing and gravity steps on the fitted synthetic 92 cm form. The readings above describe the endpoint. The wool trim and AI-generated facial coloring are illustrative.

The mean gap averages the distance at the chest ring. Edge strain is the change in edge length over the whole garment. This run’s endpoint range is -4.36% to +4.06%. Contact shows the magnitude of the body’s barrier force at each welded cloth vertex, in newtons. Physical fit requires a sewn sample.

The trousers are shown at their own drape endpoint on the identical posed body. Each garment was solved separately. Interactions between the two layers were outside these runs.

Cloth in three dimensions

The drape gallery.