FrankenTextilesDrape gallery ↗

The trouser study

Room to move.

One pattern, seven cut pieces. Bend the form, change the elastic, or take a section through the folds.

Gathered trousersStanding
Reference rendering of the standing trouser studyLoading surface…
Native garment surfaceDrag to orbit

On film

Three views of the cut.

Bending the kneeMP4 ↓
Holding the waistMP4 ↓
Inside the foldsMP4 ↓
Pattern, poses and solver readings

The seven panels and seventeen seams come from the downloadable pattern. The fabric finish is illustrative. The drapes use a 12 mm mesh, 2 mm self-contact thickness and synthetic material parameters. A full seat bends the hips and knees by 90°. The squat bends them by 100° and 110°, with 10° at the ankles. Each case starts at its prescribed posture. Chair and floor contact are outside the calculation.

The gap is the solver’s mean seat-ring clearance. Negative waistband shift means the band dropped. The slice uses display geometry rounded to 0.1 mm. Its left-to-right span is a geometric dimension across the section. Physical fit requires a sewn sample.

Download the run summaries and synthetic inputs ↓